You try to hatch a restroom wall, and the hatch comes out in pieces. Every line on the other layers gets in the way. So you zoom in, pick boundaries one by one, and lose 10 minutes on a simple hatch.
The fix is to isolate layers in AutoCAD. The built in LAYISO command works, but its settings are slow to change. So I made two custom commands, Isolate Hide and Isolate Fade. Each one works with a single click.
What Does LAYISO Do in AutoCAD?
LAYISO isolates the layers of the objects you pick. Every other layer is either turned off or locked and faded. You choose which one in the command’s Settings option. When you are done, LAYUNISO brings all your layers back the way they were.
The problem is that AutoCAD remembers only one setting. If you hide layers now and need to fade them a minute later, you have to open Settings again. That is why two separate commands are faster.
Isolate Hide vs Isolate Fade: When to Use Each
Use Isolate Hide to hatch and count
Isolate Hide turns off every other layer. Your screen only shows what you need.
- Hatch faster: Isolate the wall layer, then hatch the gyp board in one pick. No more broken hatch pieces.
- Count objects: Isolate your light fixtures on a reflected ceiling plan. Select them all, and Quick Properties tells you the count. In the video, I count 161 2×4 lights in seconds.
- Clean up: See only one layer, so you can spot stray lines and wrong objects fast.
Use Isolate Fade to edit with context
Isolate Fade locks and fades every other layer. You can still see the full plan, but you can’t touch it by mistake.
Say a restroom wall needs to move from 10′-2″ to 9′-0″. If you stretch it with everything active, the doors, fixtures, and hatch move too. With Isolate Fade, you pick only the walls you need, stretch them 9 feet, and everything else stays put. Then run LAYUNISO and fix the hatch.
How to Create the Isolate Hide and Fade Commands
You only build these once. After that, they live on your ribbon forever.
- Type CUI and press Enter.
- In the Command List, find Layer Isolate, right click it, and pick Duplicate. Rename it Isolate Hide.
- Paste the Hide macro below into the Macro field.
- Click Edit under the button image and draw a big letter H, so you can tell the icons apart. Export it and assign it as the small and large image.
- Repeat steps 2 to 4 for Isolate Fade, using the Fade macro and a letter F.
- Go to Ribbon > Panels > Home 2D – Layers. Drag both new commands into the panel, then click Apply and OK.
Isolate Hide macro (Settings, Off):
^C^C_LAYISO;_S;_O;;
Isolate Fade macro (Settings, Lock and fade, 70%):
^C^C_LAYISO;_S;_L;70;
Tip: While you are in the Layers panel, you can remove the basic Layer Isolate and Previous buttons you no longer need. They stay in the Command List, so you can add them back anytime.
Get the Ready to Use Macros
Don’t want to build them yourself? Patreon members get the macro code and icons ready to paste. Get the Isolate Layers macro on Patreon.
Keep learning:
